產品中心
生產銷售 / 規格齊全 / 質量保障
聯系方式
公司地址:河南省洛陽市洛龍區軍民路2號
辦公地址:洛陽市高新開發區創業路 國內貿易
咨詢電話:0379-65519230
電子郵箱:30930229@qq.com
聯系人:韓先生
手機:13937979186
國際貿易
咨詢電話:0379-65199293
QQ:30930229
電子郵箱:ssmy200909@sina.com
聯系人:李女士
手機:13937988967
全國服務熱線:
139-3797-9186
地址:河南省洛陽市洛龍區軍民路2號
目前,對日用瓷、衛生瓷、電瓷、工藝瓷等的焙燒多采用隧道窯、梭式窯等***率熱工設備。其窯車支架絕大多數選擇SiC制品,尤其是橫梁采用R-SiC材質,價格昂貴,大幅增加了使用成本。R-SiC方梁雖然高溫性能優越,但仍然難以克服該材質固有的抗氧化性差的致命弱點,表現為使用一個階段后,由于氧化造成的組織結構脆弱,使其高溫強度 迅速衰減,縮短了使用壽命。
我公司運用先進工業技術,采用進口原料,適時推出了SF-F方梁,該方梁具有優良的高溫性能和熱震穩定性,承重大,直線度、平整度好,能在任何高溫氣氛下使用,不存在氧化還原現象,壽命可達300次以上。
At present, the firing of table ware, sanitary ware, electronic ceramic and ceramic and craft ceramic mostly adopt the highly efficient thermal equipment such as tunnel kiln, shuttle kiln and so on. The supports of kiln car mostly are silicon-carbide products; especially crossbeams made of the very expensive R-SIC increase the expenses of consumption by a big margin. Although R-SIC square-beam has better high temperature properties, it is difficult for it to overcome its innate weakness of bad oxidation resistance, which can be proved form that its flexural strength at high temperature sharply reduces after used for a period of time, for the reason of that the structure becomes fragile due to oxidation. Undoubtedly, its using life is fairly short.
Our company introduces the SF-F square-beam properly, it is produced with advanced technology and imported raw materials. SF-F square-beam has good properties at high temperature, thermal shock resistance, straightness and flatness and can bear heavier load of products, it also can be used in any atmosphere at high temperature without oxidation and reduction. The life will up to 300 times.